HJF118-F5 Automatic Horizontal Injection Molding | RFQ Sourcing Details

The HJF118-F5 is an automatic, computerized horizontal injection molding machine offered for producing custom bus pass holders. The listed machine uses plunger-type plasticizing and mechanical clamping and is specified for thermoplastics including PP, PE, and ABS.

Supported configuration and capacity The machine is rated for 1,180 kN clamping force and a 340 mm opening stroke. Tie-bar spacing is 370 × 370 mm. Supported mold height ranges from 150 to 400 mm. The ejector system has a 100 mm stroke, 33 kN force, and five ejector points.

Three screw configurations are listed: 35, 38, and 40 mm diameters. Their respective theoretical shot volumes are 154, 181, and 201 cm³, while the stated PS injection weights are 141, 165, and 183 g.

Listed injection rates range from 80 to 105 g/s, and listed injection pressures range from 167 to 219 MPa depending on the selected screw. Screw speed is adjustable from 0 to 220 r/min.

Machine systems The clamping unit is described with an enlarged tie-bar area, a central-clamping structure, T-slot and tapped-hole platen provisions, mold-height adjustment, and a mechanical safety interlock.

The injection unit includes a linear-motion guide, a high-speed and high-pressure injection structure, twin nozzle cylinders, and a specialized screw-barrel design. The hydraulic system has a maximum pump pressure of 16 MPa.

It includes pressure-and-flow control, a low-pressure mold protection system, and separate grease and lubrication-oil circuits. A servo hydraulic system is listed as optional, so buyers should confirm whether it is included in the quoted configuration.

The electrical control system is described with an 8.4-inch, 800 × 600 display, USB 2.0 and 100BASE-T Ethernet ports, 32 input/output points, curve displays for injection-end and temperature tracking, and storage and USB transfer for up to 120 process parameter sets.

Installation footprint and utilities Listed machine dimensions are 4.2 × 1.25 × 1.8 m, with a machine weight of 3.5 t and an oil-tank capacity of 210 L. Pump motor power is 11 kW and heating power is 6.5 kW.

The package information separa;buyers should reconcile these shipping figures with the stated operating dimensions and machine weight before arranging transport. Commercially supported details Customization is available, online after-sales service is listed, and the warranty period is 18 months.

The supplied description states that the warranty covers the machine platen, base, injection unit, and clamping unit. The machine is listed with CE and ISO 9001:2008 certification, a standard export package, and production capacity of 80 sets per month.

Procurement questions to confirm Before ordering, confirm the exact resin, part drawing, part weight, cavity count, mold dimensions, runner design, required cycle time, and surface-quality standard for the bus pass holder.

Ask for a shot-size and clamping-force calculation based on the intended mold rather than selecting the screw configuration from nominal capacity alone.

Also verify the included servo option, electrical voltage and frequency, controller language, machine color, cooling requirements, installation and training scope, spare-parts list, documentation, inspection criteria, packaging dimensions, shipping weight, and warranty exclusions in the final contract.