HM Series Automatic Horizontal Injection Molding | RFQ Sourcing Details
Injection Molding Equipment · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Injection Molding Equipment. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
Product overview The HM series is horizontal, screw-plasticizing injection molding equipment intended for PET preforms, caps, and other plastic products.
The listed range covers HM-1000 through HM-5500 models, allowing buyers to select equipment according to mould dimensions, required shot capacity, clamping force, and production needs. Requirements above the HM-5500 model are available on a customized basis.
Supported configuration details The machines use hydraulic and mechanical clamping and are described as automatic and computerized. Available operating modes include manual, semi-automatic, and fully automatic operation.
The control system includes a color LCD interface, movement monitoring, alarms, fault diagnosis, slope settings for movement starts and stops, storage for 99 mould-processing procedures, peripheral interfaces, and a remote-control interface.
A servo system adjusts motor speed using pressure and flow instructions from the controller together with actual feedback. The hydraulic system uses proportional pressure and flow control for multi-level pressure and speed switching. Medium and large models are described as using a two-way cartridge-valve system.
The stated hydraulic-system noise level is below 75 dB. Model range Across the published HM-1000 to HM-5500 configurations, stated clamping force ranges from 1,000 to 5,500 kN. Screw diameters range from 36 to 90 mm, while stated shot weights range from 128 to 2,466 g.
Available mould-thickness ranges, tie-bar spacing, injection pressure, injection rate, motor power, heating power, machine size, and machine weight vary by model and injection-unit option. The listed maximum pump pressure is 16 MPa for all published models.
The equipment is supplied in wooden packaging and carries a stated 24-month warranty. Customization is available. CE and ISO 9001:2008 certifications are listed in the source facts.
Procurement questions to confirm Before ordering, the buyer should identify the resin, product geometry, target part weight, number of cavities, mould dimensions, required output, and utility conditions.
Ask for a model-specific technical sheet because several models have A and B injection-unit options, and some values in the published table appear irregular or ambiguously aligned.
Confirm the selected screw diameter, actual shot capacity, injection pressure, tie-bar clearance, mould-thickness allowance, ejector arrangement, nozzle specification, electrical supply, connected load, cooling requirements, hydraulic-oil requirements, and machine footprint.
The buyer should also confirm whether the proposed configuration is suitable for the intended PET preform, cap, or other plastic product;which moulds and auxiliary devices are included;the scope and conditions of the 24-month warranty;commissioning and training arrangements;spare-parts availability;documentation supplied;packaging details;and the exact certification documents applicable to the ordered machine.
HM | Applications and Buyer Notes
HM is organized as a sourcing-ready Injection Molding Equipment reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time qu
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Injection Molding EquipmentBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Warranty
- 24 monthsBased on visible page data; confirm exact value in the RFQ.
- Packaging
- Wooden packageBased on visible page data; confirm exact value in the RFQ.
- Model range
- HM-1000 to HM-5500Based on visible page data; confirm exact value in the RFQ.
- Plastic type
- ThermoplasticBased on visible page data; confirm exact value in the RFQ.
- Customization
- Available;requirements above HM-5500 require customizationBased on visible page data; confirm exact value in the RFQ.
- Clamping force
- 1,000–5,500 kN, depending on modelBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Extrusion Lines categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Auxiliaries And Recycling categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Blow Molding And Thermoforming categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Injection Molding Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Extrusion Line Exporters sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 1250 Ton Aluminum Alloy Injection Die Casting Machine Die Casting Machine And High Pressure Die CaThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Plastic Machinery Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Injection Molding Machine Manufacturers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 130 Ton Zinc Alloy Injection Die Casting Machine Die Casting And CastingThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 20t 25t 40t 60t Small Injection Molding Machine Plastic Injection Molding Machines Small InjectionThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 20ton Plastic Injection Molding Machine Injection Molding Machine And 20ton Injection Molding MachThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 240 Ton Horizontal Servo Injection Molding Machine For Plastic PreformsThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
HJF118-F5 Automatic Horizontal Injection Molding Machine for Plastic RingsRequest Quote
Haitian MAIII 250T PET 2500 kN Automatic Horizontal Injection Molding MachineRequest Quote
Powerjet DP Series Automatic Two-Platen Thermoplastic Injection Molding MachineRequest Quote
ACE Series Horizontal BMC and Bakelite Thermoset Injection Molding MachineRequest Quote
NT330 3300 kN Horizontal Automatic Thermoplastic Injection Molding MachineRequest Quote
Leantall NT630 6300 kN Horizontal Thermoplastic Injection Molding MachineRequest QuotePlasticMachHub related sourcing paths
PlasticMachHub procurement phrases
PlasticMachHub related product samples
Product Application This Horizontal type PVC plastic injection molding machine reduces and improves the production machi...
Servo Injection Molding Machines Efficient 10t Hydraulic Oil Wax Injection Molding Equipment - OEM Machine and Customized MachineWAX INJECTION MACHINE A wax injection machine is a type of manufacturing equipment used to produce candles, wax figures,...
Servo Injection Molding Machines Servo Energy-Saving Injection Molding Machine - Servo Energy-Saving Injection Molding Machine and SeIT Series Injection Molding Machine IT Servo Energy-saving Injection Molding Machine Provide more flexible controlling f...
Servo Injection Molding Machines High Precision Servo Car Bumper Injection Molding Machine for Automotive Plastic Parts - Injection MHigh-Performance Car Bumper Injection Molding Machine Our high-performance servo injection molding machine is engineered...
Servo Injection Molding Machines All-Electric, Hydraulic and Hybrid Injection Molding Machines - Injection Molding Machine and InjectCLAMPING UNIT 1.Enlarged tie-bar distance, more molds can be used. 2. The high rigidity formwork design of QT500-7 nodul...
Servo Injection Molding Machines Pet Preform Injection Molding Machine/Plastic Injection Molding Machines - 2026 Injection Molding MaProduct Application This Horizontal type PVC plastic injection molding machine reduces and improves the production machi...