YN-SMZ-10LB-Y 10-Ton Duplex Hydraulic Wax Injecti | RFQ Sourcing Details

This YN-SMZ-10LB-Y hydraulic wax injection machine is designed for producing wax patterns in lost-wax precision casting workflows. It uses a four-pillar, duplex-workstation configuration and provides a maximum clamping force of 10 tons.

The stated mold space is 460 × 430 × 500 mm, with 400 mm of mold travel and a 100 mm minimum mold height. The machine includes PLC and touch-screen control. Operators can modify parameters such as pressure and action time through the human-machine interface.

Supported operating arrangements include an automatic mode with the molds fixed above and below, plus manually pushed single- or double-mold modes.

Single- and multiple-stage wax-pressure profiles can be selected, and the wax pressure and flow are controlled separa L maximum injection capacity and hydraulic variable-pressure control over a stated range of 0–10 MPa.

The duplex injection nozzle has a stated diameter range of 6–9 mm and an approximate wax injection rate of 3–8 mL/s. Its position can be adjusted vertically, laterally and backward to suit the mold setup. An electrically powered vertical nozzle movement is included.

Temperature management uses a three-layer wax-tube system that can heat or cool through heat-transfer oil. The stated temperature-control error is within ±0.5°C, while the stated shrinkage rate is within 0.5%.

The design uses a wax-free-cylinder arrangement intended to eliminate the stated 24-hour holding step in a wax incubator. Automatic timed control of temperature, pressure and flow can be configured according to customer requirements.

The main frame is described as welded from 20 mm hot-rolled plate, while the inner wax-box layer is welded from 304 stainless steel plate. The hydraulic oil tank capacity is 150 L.

Electrical protection and control features include a main-power leakage protection switch, motor , thermal-overload protection, PLC input/output control and a non- .

Procurement confirmation: Before ordering, the buyer should provide mold dimensions, wax characteristics, required pattern output and preferred single- or double-mold operating method.

Confirm whether the 10-ton model suits the intended tooling, whether customized automatic controls are required, and which utilities must be available at the installation site.

Buyers should also verify the final machine configuration, overall dimensions, gross weight, electrical requirements, commissioning scope, spare-parts list and production schedule in the purchase contract, because some listed measurements and service terms may vary with the ordered configuration.